Custom Shark Jaw

A bollard is a vessel's mooring device. It is a device used to anchor a vessel to shore. A bollard has one or two short posts attached to the deck and is used to fasten and operate the cable. How should it be arranged on a ship? This is a technical problem. Let's take a look at it. The direction of the bollard on the ship shall be consistent with the direction of the cable tow. A certain distance shall be kept between the bollard and the side fairway or fairway, not less than 6 times the...

Features: • Insulation louver air inlet window, instead of the traditional sliding curtain equipment, is widely used in the summer air inlet; • There are 3 kinds of shutter opening and closing modes: automatic opening, manual opening and electric opening, which are convenient and easy to use. Jiangsu Haitai Ship's Whole Set Co.,Ltd was founded in 1995.It is a company specialized in designing, manufacturing and research of deck machinery and oceanic project. For a long time the company...

Chain stopper, also known as chain stopper or chain stopper, refers to the special appliance for pausing or clamping the chain. Attach to windlass and anchor . The chain tube is separated from the chain wheel to bear the tension of the anchor and chain when the anchor is collected and mooring, so that it will not be transmitted to the anchor the sprocket. The commonly used are spiral pawl, knife pawl, tongue pawl, CAM pawl, chain pawl and roller knife chain pavers, etc. role (1) it is arranged...

Airtight doors should meet the following requirements: 1. It should be a steel structure with sufficient strength, and the thickness of the main steel plate of the door should not be less than 4mm. 2. The opening and pressing sealing device of the door should be firmly fixed and can only be operated on the inside of the door. Under the action of ordinary tools, the device should not be deformed, loosened or displaced. 3. The number of hinges for each door should be no less than 2. Lock...

The principle of using the shark tongs: when the towing machine needs to tow, raise the shark tongs and the towing pin, remove the cover of the shark tongs, and open the jaws. Connect the towed object with a wire rope, and the end of the wire rope is pulled to the tugboat, passed through the middle of the two fairleads of the tow pin, and then passed through the jaws of the shark tongs. Close the jaws, and clamp the end of the wire rope (usually there is a connecting collar, at this time, the...

Marine cranes are devices and machinery used by ships for loading and unloading goods, mainly including boom devices, deck cranes and other loading and unloading machinery. It is a special crane that performs transportation operations in the offshore environment, and is mainly used for important tasks such as the transportation and transfer of goods between ships, maritime supply, and the release and recovery of underwater operation equipment. The special application environment at sea brings...

Shark jaw is a marine safety device. The main function is to hold the cable or steel rope tightly to prevent the sliding of the cable, steel rope and anchor chain. Shark clamp device consists of shark clamp installed on the stern deck, bollard, tail roller, hydraulic pump station and electric control system. The shark pincer device designed by our company is responsible for the three tasks of towing, anchoring and supplying. In order to safely, quickly and effectively carry out the anchoring...

Professional custom marine ventilation grille, beautiful price, fast delivery, welcome to buy! Jiangsu Haitai Ship's Whole Set Co.,Ltd was founded in 1995.It is a company specialized in designing, manufacturing and research of deck machinery and oceanic project. For a long time the company has established a cooperation partnership on technical cooperation and research and development of new product with the major research institutes of China State Shipbuilding Corporation, such as Shanghai...

The marine fungus ventilator is suitable for natural ventilation and mechanical ventilation installed on the open deck of various ships for ventilation. The technical conditions for the manufacture, testing and acceptance of marine mushroom ventilators conform to GB/T295-2000 "Marine mushroom ventilators". The marine fungus-shaped ventilator has the characteristics of reasonable structure, convenient opening and closing, beautiful appearance, complete specifications, good ventilation effect,...

System Features: High efficiency and energy saving: direct combination of pump and motor, simplified oil circuit to save space, installation of accumulator, low noise, high efficiency, Low heat generation, high performance and energy saving Rich selection of components: motor, oil pump valve block, cooler, terminal box, oil circuit block, oil return filter, etc., due to the selection of components There are many, choose the most suitable components according to the application; Diversified oil...

We should pay attention to the following points when using the ship shifting winch: First, it is necessary to choose appropriate tools for work. Too large tools are easy to cause work damage, while too small tools are easy to cause tool damage. If the tool is slightly faulty or cannot achieve the original function after use, it cannot be used any more, and it should be checked immediately. Two, check and maintain tools regularly (about once a week), add butter to bearings and other rotating...

The frequency conversion winch complies with the following requirements when transporting traditional Chinese medicine: 1. The winch shall be inspected in detail before each shift, and shall not be used until the problem is found; 2. The winch should have a double braking device, which should be able to act independently or at the same time to ensure the safe braking of the winch. 3. When the power is off, the materials lifted by the winch should be slowly lowered to the bottom of the inclined...

Engineering hydraulic winches are widely used for lifting or towing materials in shipbuilding, construction, hydraulic engineering, forestry, mining, wharf and other industries. This winch has the characteristics of compact structure, high safety, high efficiency, large starting torque, low speed stability, low noise, reliable operation, and can withstand extreme working conditions. Jiangsu Haitai Ship's Whole Set Co.,Ltd was founded in 1995.It is a company specialized in designing,...

Hydraulic windlass is also called electric hydraulic windlass. It drives the oil pump by motor, drives the motor by high pressure oil, and then drives the transmission gear by reducer (or without reducer) to make the windlass run. Its structure is relatively compact and its volume is small. Now there has been an automatic hydraulic windlass, which is equipped with a chain length sensor. When anchoring, when all the chains needed to be thrown are thrown, the windlass will stop automatically....

The towing machine is a kind of special towing equipment, which is used for retracting and releasing cables and towing ships without self-propelled capability. Ships and offshore installations (such as barges, cranes, floating docks, dredgers and drilling platforms, etc.), as well as ships that have lost their ability to self-propell, are key equipment on some civilian and military ships. The towing machine is generally composed of a driving device, a reel device, a braking device, a rope...

Shark clamp device is one of the indispensable and important equipment for modern marine engineering ships to carry out salvage, deep-water anchoring and supply of offshore platforms, etc. It is mainly used to clamp the anchor chain or cable and prevent the anchor chain or cable from sliding. It can be used in conjunction with tow rope machines, cranes, stern drums, etc. T here are two types of fork: FORK (or directly with the manufacturer's name, such as KARMOY FORK). Another link type:...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. Electric Hydraulic Winch winch refers to a material lifting or flat dragging widely used in Marine engineering, construction, water conservancy engineering, etc. This is a ship sapre parts.This series winch has the characteristics of compact structure, small size, light weight and beautiful appearance, and has the characteristics of good...

A fairlead is a fairlead device installed on the deck of a ship and used when the ship is berthing. Roller fairleads are widely used in ships because of the low friction between them and the cables, so the cables wear less and are convenient for the winch to take up the cables. In the existing roller fairlead, the roller shaft has two directions, horizontal and vertical. In order to make the roller fairlead have the multi-directional fairlead function at the same time, the vertical axis roller...

Shark Fork is a marine safety device. The main function is to hold the cable or steel rope tightly to prevent the sliding of the cable, steel rope and anchor chain.Shark Tank Ifork Jiangsu Haitai Ship's Whole Set Co.,Ltd was founded in 1995.It is a company specialized in designing, manufacturing and research of deck machinery 、vessel machinery and oceanic project. For a long time the company has established a cooperation partnership on technical cooperation and research and development of new...

Deck Machinery Shark Fork is a marine safety device. The main function is to hold the cable or steel rope tightly to prevent the sliding of the cable, steel rope and anchor chain. Shark Pliers