Manual Anchor Windlass

The windlass is installed on the main deck of the ship's fore and stern for the ship to lift the anchor and drop the anchor and moor. Windlass can be divided into manual, electric, hydraulic, pneumatic, etc. according to the driving form. We mainly talk about explosion-proof electric windlass. It is mainly a windlass driven by an electric motor. Usually, the windlass and the mooring machine form a linkage unit, which is installed in the bow of the ship and used for anchor lifting, anchoring and...

Chain stopper, also known as chain stopper or chain stopper, refers to the special appliance for pausing or clamping the chain. Attach to windlass and anchor . The chain tube is separated from the chain wheel to bear the tension of the anchor and chain when the anchor is collected and mooring, so that it will not be transmitted to the anchor the sprocket. The commonly used are spiral pawl, knife pawl, tongue pawl, CAM pawl, chain pawl and roller knife chain pavers, etc. role (1) it is arranged...

Mooring winch is used for lifting anchor and mooring cable of ships. This machine is single drum winch, horizontal installation, large capacity, suitable for engineering ships. This machine is hydraulic driven, hydraulic motor is small in size, light in weight, convenient for speed regulation Jiangsu Haitai Ship's Whole Set Co.,Ltd was founded in 1995.It is a company specialized in designing, manufacturing and research of deck machinery and oceanic project. For a long time the company...

Manual regulating valve is an indispensable central air-conditioning end fitting in the ventilation, air conditioning and air purification projects of industrial plants and civil buildings. mixing adjustment. The characteristics of the manual regulating valve are as follows: (l) The size of the split multi-leaf manual regulating valve connection is the same as the size of the rectangular air duct stipulated by the national standardization of ventilation ducts. (2) The vanes of the manual...

Marine cranes are devices and machinery used by ships for loading and unloading goods, mainly including boom devices, deck cranes and other loading and unloading machinery. It is a special crane that performs transportation operations in the offshore environment, and is mainly used for important tasks such as the transportation and transfer of goods between ships, maritime supply, and the release and recovery of underwater operation equipment. The special application environment at sea brings...

System Features: High efficiency and energy saving: direct combination of pump and motor, simplified oil circuit to save space, installation of accumulator, low noise, high efficiency, Low heat generation, high performance and energy saving Rich selection of components: motor, oil pump valve block, cooler, terminal box, oil circuit block, oil return filter, etc., due to the selection of components There are many, choose the most suitable components according to the application; Diversified oil...

The anchor scraper is set on the bulkhead of the chain locker or on the deck near it, and the end link of the end chain link is usually hung on the chain scraper to prevent the whole anchor chain from falling off. In case it is too late to receive the anchor, the chain discarder can be opened to discard the anchor and anchor chain. The chain stopper and the chain scraper are often used together. The chain stopper is located on the main deck of the bow between the anchor chain drum and the...

The windlass is mainly used for the operation of throwing (lifting) the anchor on the ship to achieve a fixed position. In the mooring maneuver, it controls the speed of the ship and the rotation of the bow. Using manpower, electric motor, hydraulic motor, etc. as power, it is usually installed on the overtime of the ship. According to the driving form, it can be divided into: manual, electric, hydraulic. Anchor equipment and mooring equipment are important deck equipment of ships and play an...

Hydraulic windlass is also called electric hydraulic windlass. It drives the oil pump by motor, drives the motor by high pressure oil, and then drives the transmission gear by reducer (or without reducer) to make the windlass run. Its structure is relatively compact and its volume is small. Now there has been an automatic hydraulic windlass, which is equipped with a chain length sensor. When anchoring, when all the chains needed to be thrown are thrown, the windlass will stop automatically....

Marine crane control has been widely concerned by military and civil Marine engineering in many countries, and it is of great theoretical value and universal significance to study the control of this kind of nonlinear and strongly coupled underactuated system under special disturbance. The control of Marine crane can be divided into two aspects: vertical control to reduce the influence of ship motion and lateral anti-swing control to restrain load swing. For vertical control, the commonly used...

The frequency conversion winch complies with the following requirements when transporting traditional Chinese medicine: 1. The winch shall be inspected in detail before each shift, and shall not be used until the problem is found; 2. The winch should have a double braking device, which should be able to act independently or at the same time to ensure the safe braking of the winch. 3. When the power is off, the materials lifted by the winch should be slowly lowered to the bottom of the inclined...

Hydraulic windlass Windlass can be divided into manual, electric, hydraulic, steam and so on according to the driving form. Windlass can be divided into φ12- φ120mm and other specifications according to the diameter of anchor chain. Windlass can be divided into single side and double side according to the drum distribution. Windlass is mainly composed of base, bracket, anchor chain wheel, brake, sprocket, gearbox, electronic control system (except manual windlass), electric windlass has...

Hydraulic windlass is also called electric hydraulic windlass. It drives the oil pump by motor, drives the motor by high pressure oil, and then drives the transmission gear by reducer (or without reducer) to make the windlass run. Its structure is relatively compact and its volume is small. Now there has been an automatic hydraulic windlass, which is equipped with a chain length sensor. When anchoring, when all the chains needed to be thrown are thrown, the windlass will stop automatically....

The anchor abandoner is a device that abandons the anchor urgently in case of sudden danger on the ship. There are various forms of anchor abandoner, simple anchor abandoner, screw anchor abandoner, and bolt-type anchor abandoner. Their main functions When the ship is anchored at sea, emergency anchor lifting is required under special circumstances. If the windlass fails and cannot lift anchor in time, the safety of the ship will be threatened. The disengagement of the chain link from the...

The air volume control valve is widely used, widely used in industrial and mining, civil building HVAC systems, to accurately adjust the air flow, is one of the key equipment to control the ventilation mode in various environments. Its main features are flexible operation, low noise, small leakage, (closed type leakage < 0.5%) wide operating temperature range, reliable structure, safety and convenience. Structural features of manual air volume control valve (l) The blade width of the manual...

Pump station high performance, easy operation, convenient maintenance.This product is often used with Electric Hydraulic Winch and it is a ship spare parts. Our company can make special design according to the special requirements of customers to meet the requirements of the site environment。 We have check the oil level roderly and keep oil clean,keep the hydraulic away from heat source and fire,Non-professional person is not allowed to turn the pressure adjusting handle. Jiangsu Haitai Ship's...

The hydraulic windlass is also called electro-hydraulic windlass.This is a Deck Machinery. It drives the oil pump by the electric motor, drives the motor with high pressure oil, and then drives the transmission gear through the reducer (or no reducer) to make the windlass run. Its structure is relatively compact and the volume is relatively small. Small. Now there has been an automatic hydraulic windlass, which is equipped with an anchor chain length sensor. When the anchor chain is thrown out,...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. The marine hydraulic windlass adopts the electric-hydraulic power supply mode, and the arrangement is symmetrical on the left and right. 1 cable pulley, 1 winch drum, 1 auxiliary drum for each set. Driven by hydraulic motors through open gears. The power pump station consists of 2 oil pump units and 1 oil tank, and the proportional valve is...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. The electric anchor winch is mainly composed of hydraulic motor (low speed or high speed motor), hydraulic normally closed multi-disc brake, planetary gearbox, clutch (optional), reel, support shaft, frame, rope pressing device (optional), etc. . The hydraulic motor has high mechanical efficiency, large starting torque, and can be equipped...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. Electric anchor winch is a light and small lifting equipment (see hoisting machinery) that uses a drum to wind a wire rope or chain to lift or pull heavy objects, also known as a hoist. Hydraulic winches are mainly winches with larger rated load. Generally, winches from 10T to 5000T are designed as hydraulic winches. Electric anchor winches...