Windlass Chain Stopper

Cast steel knife roller chain stopper machine knife switch stopper screw compressor chain stopper customizable knife switch apparatus set up a mutual match on ontology and wedge gate wedge grooves, wedge gate when used in the elevator shaft under the action of gravity will be a fixed rope chain conformity in wedge shaped groove, but when the cable chain is met excessive tensile force lift shaft will be raised to release a cable chain down again stuck cable chain, This prevents the chain from...

The windlass is installed on the main deck of the ship's fore and stern for the ship to lift the anchor and drop the anchor and moor. Windlass can be divided into manual, electric, hydraulic, pneumatic, etc. according to the driving form. We mainly talk about explosion-proof electric windlass. It is mainly a windlass driven by an electric motor. Usually, the windlass and the mooring machine form a linkage unit, which is installed in the bow of the ship and used for anchor lifting, anchoring and...

Chain stopper, also known as chain stopper or chain stopper, refers to the special appliance for pausing or clamping the chain. Attach to windlass and anchor . The chain tube is separated from the chain wheel to bear the tension of the anchor and chain when the anchor is collected and mooring, so that it will not be transmitted to the anchor the sprocket. The commonly used are spiral pawl, knife pawl, tongue pawl, CAM pawl, chain pawl and roller knife chain pavers, etc. role (1) it is arranged...

Marine cranes are devices and machinery used by ships for loading and unloading goods, mainly including boom devices, deck cranes and other loading and unloading machinery. It is a special crane that performs transportation operations in the offshore environment, and is mainly used for important tasks such as the transportation and transfer of goods between ships, maritime supply, and the release and recovery of underwater operation equipment. The special application environment at sea brings...

System Features: High efficiency and energy saving: direct combination of pump and motor, simplified oil circuit to save space, installation of accumulator, low noise, high efficiency, Low heat generation, high performance and energy saving Rich selection of components: motor, oil pump valve block, cooler, terminal box, oil circuit block, oil return filter, etc., due to the selection of components There are many, choose the most suitable components according to the application; Diversified oil...

The windlass is mainly used for the operation of throwing (lifting) the anchor on the ship to achieve a fixed position. In the mooring maneuver, it controls the speed of the ship and the rotation of the bow. Using manpower, electric motor, hydraulic motor, etc. as power, it is usually installed on the overtime of the ship. According to the driving form, it can be divided into: manual, electric, hydraulic. Anchor equipment and mooring equipment are important deck equipment of ships and play an...

Hydraulic windlass is also called electric hydraulic windlass. It drives the oil pump by motor, drives the motor by high pressure oil, and then drives the transmission gear by reducer (or without reducer) to make the windlass run. Its structure is relatively compact and its volume is small. Now there has been an automatic hydraulic windlass, which is equipped with a chain length sensor. When anchoring, when all the chains needed to be thrown are thrown, the windlass will stop automatically....

Marine crane control has been widely concerned by military and civil Marine engineering in many countries, and it is of great theoretical value and universal significance to study the control of this kind of nonlinear and strongly coupled underactuated system under special disturbance. The control of Marine crane can be divided into two aspects: vertical control to reduce the influence of ship motion and lateral anti-swing control to restrain load swing. For vertical control, the commonly used...

Hydraulic windlass Windlass can be divided into manual, electric, hydraulic, steam and so on according to the driving form. Windlass can be divided into φ12- φ120mm and other specifications according to the diameter of anchor chain. Windlass can be divided into single side and double side according to the drum distribution. Windlass is mainly composed of base, bracket, anchor chain wheel, brake, sprocket, gearbox, electronic control system (except manual windlass), electric windlass has...

Hydraulic windlass is also called electric hydraulic windlass. It drives the oil pump by motor, drives the motor by high pressure oil, and then drives the transmission gear by reducer (or without reducer) to make the windlass run. Its structure is relatively compact and its volume is small. Now there has been an automatic hydraulic windlass, which is equipped with a chain length sensor. When anchoring, when all the chains needed to be thrown are thrown, the windlass will stop automatically....

1. It is installed at the end of the deck, with a cylindrical drum, which is used to guide the cable to the fairlead of the hoisting machine or the bollard. It consists of three or four rollers. The rollers must be disassembled, inspected and refueled regularly to keep their rotation flexible. 2. A fairlead that can guide the rope normally when the bow and stern swing. Jiangsu Haitai Ship's Whole Set Co.,Ltd was founded in 1995.It is a company specialized in designing, manufacturing...

Pump station high performance, easy operation, convenient maintenance.This product is often used with Electric Hydraulic Winch and it is a ship spare parts. Our company can make special design according to the special requirements of customers to meet the requirements of the site environment。 We have check the oil level roderly and keep oil clean,keep the hydraulic away from heat source and fire,Non-professional person is not allowed to turn the pressure adjusting handle. Jiangsu Haitai Ship's...

The hydraulic windlass is also called electro-hydraulic windlass.This is a Deck Machinery. It drives the oil pump by the electric motor, drives the motor with high pressure oil, and then drives the transmission gear through the reducer (or no reducer) to make the windlass run. Its structure is relatively compact and the volume is relatively small. Small. Now there has been an automatic hydraulic windlass, which is equipped with an anchor chain length sensor. When the anchor chain is thrown out,...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. The marine hydraulic windlass adopts the electric-hydraulic power supply mode, and the arrangement is symmetrical on the left and right. 1 cable pulley, 1 winch drum, 1 auxiliary drum for each set. Driven by hydraulic motors through open gears. The power pump station consists of 2 oil pump units and 1 oil tank, and the proportional valve is...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. Chain paver is a device for clamping the anchor chain of a vessel machinery when it is sailing or anchoring. Also called chain stopper. According to the REQUIREMENTS of CCS code, the chain paver should be able to bear the experimental load equivalent to the anchor chain, and its stress should not exceed 90% of the yield strength value of...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. Chain stopper The chain stopper is located on the deck between the windlass and the chain stopper to clamp the anchor chain.This is a boat chain stopper.This is also a kind of deck machinery. After anchoring, the chain stopper on the gate can transfer the tension of the anchor chain to the hull, so that the windlass is not under stress....

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. The anchor device of the ship with chain stopper is mainly composed of five parts: anchor, anchor chain, chain stopper, anchor chain drum and windlass. The chain stopper is located on the deck between the windlass and the anchor chain drum to clamp Anchor chain. After anchoring, the chain catcher on the gate can transmit the pulling force...

The company mainly produces various marine spare parts, such as Marine fairlead, Electro Hydraulic Crane, Electric Hydraulic Winch and other deck machinery. Chain stopper The chain stopper is located on the deck between the windlass and the chain stopper to clamp the anchor chain.This is a boat chain stopper.This is also a kind of deck machinery. After anchoring, the chain stopper on the gate can transfer the tension of the anchor chain to the hull, so that the windlass is not under stress....

Chainstopper Cast steel knife roller chain stopper machine knife switch stopper screw compressor chain stopper customizable knife switch apparatus set up a mutual match on ontology and wedge gate wedge grooves, wedge gate when used in the elevator shaft under the action of gravity will be a fixed rope chain conformity in wedge shaped groove, but when the cable chain is met excessive tensile force lift shaft will be raised to release a cable chain down again stuck cable chain, This prevents the...

Cast steel knife roller chain stopper machine knife switch stopper screw compressor chain stopper customizable knife switch apparatus set up a mutual match on ontology and wedge gate wedge grooves, wedge gate when used in the elevator shaft under the action of gravity will be a fixed rope chain conformity in wedge shaped groove, but when the cable chain is met excessive tensile force lift shaft will be raised to release a cable chain down again stuck cable chain, This prevents the chain from...